Publications

R Laghaei, SM Hejazi, H Fashandi, S Akbarzadeh, S Shaghaghi,2023, Reinforcement contribution of cellulose nanocrystals (CNCs) to tensile properties and fracture behavior of triaxial E-glass fabric/epoxy composites
Composites Part A: Applied Science and Manufacturing 164, 107258
S Salehi, S Ghatrehsamani, S Akbarzadeh, MM Khonsari, 2022, Application of Continuum Damage Mechanics for Prediction of Wear with Provision for Sequential Speed Operation
Tribology Letters 70 (4), 105.

S Ghatrehsamani, S Akbarzadeh, MM Khonsari, 2022, Relationship between subsurface stress and wear particle size in sliding contacts during running-in.Mechanics Research Communications 123, 103891

SR Zahabi, M Sheikhzadeh, S Akbarzadeh, A Bahi, F Ko, 2022, On the tribology of complex 2D/3D composites bearing,Proceedings of the Institution of Mechanical Engineers, Journal of Engineering Tribology.
S Ghatrehsamani, S Akbarzadeh, MM Khonsari, Experimentally verified prediction of friction coefficient and wear rate during running-in dry contact, Tribology International 170, 107508
S Ghatrehsamani, S Akbarzadeh, MM Khonsari, Relationship between subsurface stress and wear particle size in sliding contacts during running-in, Mechanics Research Communications, 103891
M Sattari, M Kadkhodaei, S Akbarzadeh, R Gholami, A Beheshti, Wear in superelastic shape memory alloys: A thermomechanical analysis, Wear 488, 204139
S Ghatrehsamani, S Akbarzadeh, MM Khonsari, Application of Continuum Damage Mechanics to Predict Wear in Systems Subjected to Variable Loading, Tribology Letters 69 (4), 1-9
SR Zahabi, M Sheikhzadeh, S Akbarzadeh, A Bahi, F Ko, On the tribology of complex 2D/3D composites bearing, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
R Laghaei, SM Hejazi, H Fashandi, S Akbarzadeh, S Shaghaghi, Improvement in fracture toughness and impact resistance of E-glass/epoxy composites using layers composed of hollow poly (ethylene terephthalate) fibers, Journal of Industrial Textiles, 15280837211044910
A Torabi, S Akbarzadeh, B Azami, Transient Numerical Modeling and Experimental Investigation of the Effect of Surface Texture on Elastohydrodynamic Lubrication, Amirkabir Journal of Mechanical Engineering 53 (5 (Special Issue)), 6-6
MM Khonsari, S Ghatrehsamani, S Akbarzadeh, On the running-in nature of metallic tribo-components: A review, Wear 474, 203871
M Sattari, HA Esfahani, M Kadkhodaei, S Akbarzadeh, A mechanical contact model for superelastic shape memory alloys, Journal of Intelligent Material Systems and Structures 32 (2), 208-21
BA Abbasian, S Akbarzadeh, An Experimental Study On The Effect Of Lubricant Volume And Surface Texture On The Tribological Performance Of Surfaces In Point Contact, Iranian Journal Of Surface Science And Engineering
A Torabi, S Akbarzadeh, MK Esfeh, Numerical and Experimental Investigation of Erosion on Surface, IRANIAN JOURNAL OF SURFACE SCIENCE AND ENGINEERING
R Mirzaamiri, S Akbarzadeh, S Ziaei-Rad, DG Shin, DE Kim, 2021, Molecular dynamics simulation and experimental investigation of tribological behavior of nanodiamonds in aqueous suspensions, Tribology International 156, 106838
MM Khonsari, S Ghatrehsamani, S Akbarzadeh, 2021, On the running-in nature of metallic tribo-components: A review, Wear, 203871
S Ghatrehsamani, S Akbarzadeh, MM Khonsari, 2021, Experimental and numerical study of the running-in wear coefficient during dry sliding contact, Surface Topography: Metrology and Properties 9 (1), 015009
M Sattari, HA Esfahani, M Kadkhodaei, S Akbarzadeh, 2021, A mechanical contact model for superelastic shape memory alloys, Journal of Intelligent Material Systems and Structures 32 (2), 208-218
MS Salehi, M Silani, S Akbarzadeh, 2020, Finite Element Simulation and Analysis of Deposition Process and Thermal Loading on Thermal Barrier Coatings, Journal of Solid and Fluid Mechanics 10 (4), 41-51
SR Zahabi, M Sheikhzadeh, S Akbarzadeh, RA Abuzade, F Ko, 2020, Hybrid PTFE-glass hierarchical braided/epoxy composites with self-lubricating and high tribological performance, Journal of Industrial Textiles, 1528083720977210
ME Soltani, K Shams, S Akbarzadeh, A Ruggiero, 2020, A Comparative Investigation on the Tribological Performance and Physicochemical Properties of Biolubricants of Various Sources, a Petroleum-Based Lubricant, and Blends of Cramb Oil, Tribology Transactions 63 (6), 1121-1134
A Najafi, A Khoddami, S Akbarzadeh, 2020, Numerical and Experimental Investigation of Correlation between Wear and Temperature in Dry Sliding of Polyethylene-Zinc Oxide Nanocomposite, Modares Mechanical Engineering 20 (10), 2547-2558.
R Gholami, S Akbarzadeh, S Ziaei-Rad, MM Khonsari, 2020, Applying load-sharing method to the sliding contact in the presence of nano-lubricants, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.
A Samadani, S Akbarzadeh, 2020, Experimental and numerical prediction of wear coefficient in non-conformal lubricated rectangular contact using continuum damage mechanics, Surface Topography: Metrology and Properties 8 (2), 025012
R Gholami, HG Kashani, M Silani, S Akbarzadeh, 2020, Experimental and Numerical Investigation of Friction Coefficient and Wear Volume in the Mixed-Film Lubrication Regime with ZnO Nano-Particle, Journal of Applied Fluid Mechanics 13 (3)
E Azizian-Farsani, D Ghodsiyeh, S Akbarzadeh, MM Khonsari, 2020, Theoretical and experimental analysis of relation between entropy and tension–compression fatigue of aluminum 6061-T6, Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 (2), 1-10.
H Fereidouni, S Akbarzadeh, MM Khonsari, 2020, The Relation Between Subsurface Stresses and Useful Wear Life in Sliding Contacts, Tribology Letters 68 (1), 9.
D Ghodsiyeh, S Akbarzadeh, S Izman, M Moradi, 2019, Experimental investigation of surface integrity after wire electro-discharge machining of Ti–6Al–4V Sādhanā 44 (9), 196.
A Nikueimanesh, S Akbarzadeh, 2019, Numerical and Experimental Investigation of Wear in Nanostructured Tin Coating on Steel Substrate, Modares Mechanical Engineering 20 (1), 149-155.
A Ebrahimi, S Akbarzadeh, H Moosavi, 2019,Geometrical analysis of elliptical journal bearings and its effects on friction and load capacity, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.
HA Esfahani, S Akbarzadeh, M Kadkhodaei, 2019, Numerical and Experimental Study on the Effect of Considering Plastic and Elastoplastic Deformation of each Asperity in Dry Contact of Rough Surfaces,Surface Topography: Metrology and Properties.
M Kimiaei, S Akbarzadeh, 2019, Effect of profile modification on the performance of spur gears in isothermal mixed-EHL regime using load-sharing concept, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Enigeering Tribology.
H Fereidouni, S Akbarzadeh, MM Khonsari, 2019, On the assessment of variable loading in adhesive wear,Tribology International 129, 167-176 .
D Ghodsiyeh, S Akbarzadeh, S Izman, M Moradi, 2019, Experimental investigation of surface integrity after wire electro-discharge machining of Ti–6Al–4V,Sādhanā 44 (9), 196.
S Ghatrehsamani, S Akbarzadeh, 2018, "Predicting the wear coefficient and friction coefficient in dry point contact using continuum damage mechanics." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology: 1350650118785045.
P Mosaddegh, S Akbarzadeh, H Zarei, H Reiszadeh, 2018, "Tribological behavior of BK7 optical glass at elevated temperatures" Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology: 1350650118788756.
A Torabi, S Akbarzadeh, MR Salimpour, MM Khonsari, 2018, "On the running-in behavior of cam-follower mechanism." Tribology International 118: 301-313.
M Taee, A Torabi, S Akbarzadeh, MM Khonsari, M Badrossamay, 2017, "On the Performance of EHL Contacts with Textured Surfaces", Tribology Letters 65 (3), 85.
A Torabi, S.Akbarzadeh, Comparison of tribological performance of roller follower and flat follower under mixed elastohydrodynamic lubrication regime
JM Cheqamahi, M Nili-Ahmadabadi, S Akbarzadeh, M Saghafian, 2016, "Numerical Analysis of Turbocharger's Bearing using Dynamic Mesh." Journal of Applied Fluid Mechanics, 9.
H Moalleh, S Akbarzadeh, A Ariaei, 2016, “Prediction of micropitting life in spur gears operating under mixed-lubrication regime using load-sharing concept”, Journal of Engineering Tribology, 230(5), 591-599.
S Akbarzadeh, MM Khonsari, 2016, "On the Applicability of Miner’s Rule to Adhesive Wear", Tribology Letters, 63(2), 1-10.
A Torabi, S Akbarzadeh, MR Salimpour, M Taei, 2016, “Effect of surface roughness pattern on transient mixed elastohydrodynamic lubrication”. Surface Topography: Metrology and Properties 4 (1), 015001.
A Torabi, S Akbarzadeh, MR Salimpour, 2016, “Mixed Thermo elastohydrodynamic lubrication analysis of finite length cam and follower mechanism, Journal of Mechanical Science and Technology 30 (3), 1295-1303
Bagheri, M., Akbarzadeh, S., Tikani, R., Raisivand, M., 2015,"Thermo-hydrodynamic analysis of journal foil bearings using differential quadrature method", Accepted in Journal of Engineering Tribology.
Mehizadeh, M., Akbarzadeh, S., Shams, K., Khonsari, M. M., 2015, "Experimental investigation on the effect of operating conditions on the running-in behavior of lubricated elliptical contacts", Tribology Letters, vol. 59, pp. 1-13.
Torabi, A., Akbarzadeh, S., Salimpour, M., 2015, "Modeling elastohydrodynamic lubrication of cam and flat follower mechanism with grease via multigrid method", Modares Mechanical Engineering, 15, pp.41-50 (In Persian).
Tavoosi, H., Ziaeirad, S., Karimzadeh, F., Akbarzadeh, S., 2015, "Experimental and finite element simulation of wear in nanostructured NiAl coating", ASME Journal of Tribology, 137,041601-7.
Heidari, A., Forouzan, M., and Akbarzadeh, S., 2014, "Effect of friction on tandem rolling mills chattering," ISIJ International, 54, pp.2349-2356.
Parsa, M., Akbarzadeh, S., 2014, "A new load-sharing based approach to model the mixed-lubrication contact of spur gears,"Journal of Engineering Tribology, 225, pp.1319-1329.
Bahrami Ghahnavieh, A., Akbarzadeh, S., Mosaddegh, P., 2014, "A Numerical Study on the Performance of Straight Bevel Gears Operating Under Mixed Lubrication Regime," Mechanism and Machine Theory, 75, pp. 27-40.
Ebrahimi, A, and Akbarzadeh, S., 2014, "Mixed Elastohydrodynamic Analysis of Helical Gears Using Load-Sharing Concept," Journal of Engineering Tribology, 228, pp.320-331.
Heidari, A., Forouzan, M., and Akbarzadeh, S., 2014, "Development of a rolling chatter model considering unsteady lubrication," ISIJ International, 54, pp.165-170.
Akbarzadeh, S., 2013, "Parametric study on the running-in behavior in mixed-lubricated rectangular contatc," Tarbiat Modarres Journal, 13, pp.43-51. (In Farsi)
Akbarzadeh, S. and Khonsari, M. M., 2013, "On the Optimization of Running-In Operating Conditions in Applications Involving EHL Line Contact," Wear, 303, pp. 130-137.
Bahramighahnavieh, A, Mosaddegh, P., and Akbarzadeh, S., 2013, "Investigation of the Hertzian Stress Distribution on the Surface of Stright Bevel Gear," Applied Mechanics and Materials, 307, pp. 304-307.
Akbarzadeh, S. and Khonsari, M.M., 2011, “Experimental and Theoretical Investigation of Running-In,” Tribology International, 44, pp.92-100.
Akbarzadeh, S. and Khonsari, M.M., 2010, “On the Prediction of Running-In Behavior in Mixed-Lubrication Line Contact,” ASME Journal of Tribology, 132 (032102), pp.1-11.
Akbarzadeh, S. and Khonsari, M.M., 2010, “Effect of Surface Pattern on Stribeck Curve,” Tribology Letters, 37, pp.477-486.
Akbarzadeh, S. and Khonsari, M.M., 2009, “Prediction of Sliding Wear in Spur Gears Using Load Sharing Concept,” ASME Journal of Tribology, 132 (2), 024503.
Akbarzadeh, S. and Khonsari, M.M., 2008, “Performance of Spur Gears Considering Surface Roughness and Shear Thinning Lubricant,” ASME Journal of Tribology, 130 (2), 021503.
Akbarzadeh, S. and Khonsari, M.M., 2008, “Thermal Elastohydrodynamic Analysis of spur gears with Consideration of Surface Roughness,” Tribology Letters, 32, pp. 129-141.
Baek, D. K., Khonsari, M. M. and Akbarzadeh, S., 2007, “Examination of Worn Gear Segments of D8 Final Drive,” technical report submitted to Caterpillar Tech Center, Peoria, IL.
Akbarzadeh, S. and Zohoor, H., 2006, “Sensitivity Analysis of Torque Transmission Efficiency of a Half-Toroidal CVT,” SAE 2006-01-1304.
Akbarzadeh, S. and Zohoor, H., 2005, “Optimizing The Geometry of a Half-Toroidal CVT,” SAE 2005-01-3780.

Search form

Publications

Error